Black Aluminum Solar Shower Sined Dino

Functional and economical, with a large 26-liter tank and foot wash tap, for many hot showers you can take anywhere without paying anything. Just choose the place where you want to install this solar heated shower model DINO by SINED,
Ergonomic with its steel terminal part and aluminum tank. Ideal for outdoor pools, garden, public and private use. Unbeatable quality-price ratio.
Anti-limescale filter and practical protective bag to store the product in 190 cloth fabric, included as a gift.
Height 225 cm, base dimensions 25x25 cm

The shower is individually pressure tested while immersed in a water tank, after the test it is dried, rechecked, and carefully packed with custom protections.

Complete with
- Everything needed for assembly
- Ideal for garden pools.
- Water tank 26 liters
- Height 225 cm
- 20x20 cm square metal Black Matt showerhead
- Showerhead with silicone anti-limescale nozzles
- Base measurements 25x25 cm
- Foot wash tap
- Black Matt metal chrome accessories
- Anti-limescale filter
- High-quality mixer cartridge
- Recommended water pressure 3.5 bar
- Internal Braid tubes 15 Kg pressure
- Fixing plugs included
- Fixing with special protective Nylon bushings
- Protective bag to store the product in 190 cloth fabric
- Inlet tap


Some advice
Water flowing out of the showerhead after closing the shower tap is not a defect but a technical requirement!
A solar shower is not a closed system. If there is a demand for hot water, cold water enters the tank from below through the valve pushing out the hot water already present in the upper part of the tank.
The entire shower body is filled with water and acts as solar heating.
The pressure formed due to heating can escape from the showerhead.

Disassembly at the end of the season
During the winter period, the shower must be COMPLETELY DRAINED of the contained water. Also, during winter, the shower must be disassembled and stored in a dry place.
Failure to observe this warning can cause frost damage to the product.
Frost damage is not covered by warranty.
1) Close the shower and remove the garden hose.
2) To drain the shower, turn the mixer to the “HOT” position (approx. 2 minutes) and open the special drain plug.
3) Remove the fixing screws on the base and drain the remaining water from the lower part of the shower by tilting the shower (absolutely necessary operation!)

Cleaning
For cleaning, use common detergents available on the market. Do not use detergents containing solvents, abrasive detergents, or hard sponges, brushes, etc.